US 200pcs 2835 White Light Waterproof LED Module SMD 3 LED Chips, 1W, DC12V

Description

Description
US Stock, 200pcs/pack SMD
1
16ft
2835 Waterproof LED Module (3 LED Chips with Aluminum PCB Injection, White Light, 1W, DC12V)
Features:
1. High q
uality 2835
LEDs
2. Aluminum PCB injection for better outline
3. IP65 perfect for indoor and outdoor
4. Input voltage: DC12V
5. Single module cuttable
6. 160°wide beam angle for uniform lighting
7.Color temperature 6000-7000K
8.1 FT 1.7 modules
Installation Reference
Model No
Bottom Color of Lightbox
Surface Material
Depth(cm)
Illumination (lux)
Density pcs/ ㎡
Spacing (X*Y)cm
Visual Effects
LEDM-JS-ST2W-2
White
White Soft Film
8
5670-6290
12*12
8*8
OK
10
3680-3960
10*10
10*10
12
2640-2970
8*8
12*12
15
2110-2380
7*8
13.5*12
18
1770-1930
7*7
13.5*14
Specification
Model No.
LEDM-JS-ST2W-3
Color Temperature(K)
6000-7000
Beam Angle
160°
Luminous Flux (lm/pcs)
90
Ra
80+
Efficacy (lm/W)
95
Voltage (V DC)
12
Power (W/pcs)
1.0
Standard Packing Quantity(pcs)
20
Max Run in Single Feed(pcs)
20
Working Temperature
-20~+60℃
Storage Temperature
-20~+70℃
Application:
Back-lit lightbox with thickness of 6-18cm, luminous letter, LOGO etc.
Installation:
Fix by self adhesive tape or screw.
Profile Drawings:
Luminous Intensity Distribution Diagram:
Average Illumination:
Packing:
Installation:
Installation Reference
Model No
Bottom Color of Lightbox
Surface Material
Depth(cm)
Illumination (lux)
Density pcs/ ㎡
Spacing (X*Y)cm
Visual Effects
LEDM-JS-ST2W-3
White
White Soft Film
6
7980-8950
10*12
10*8
OK
8
6340-6700
10*10
10*10
10
3430-3700
7*7
14*14
12
2290-2570
6*6
16*16
15
1820-2080
5*5
18*18
18
1750-1930
5*5
18*18
Attentions before installation:
• Before installation, check that the product parameters are consistent with the requirements (Seeing product specificationsor product labels)
• Load voltage, current, power and power supply should be matched with the product.
• Follow the instructions of wiring diagram (first connect the load and then the power supply) to avoid short circuit.
• Make sure the correct connection of positive and negative poles between products and power supply. Otherwise, the light will not be on.
• Make sure the power cord firmly screwed into the terminal and it should not be pulled out by hands.
• The terminal should have insulation,waterproof and anti-corrosive treatment.
Statements and Recycling:
Statements:
Repair should be operated by a qualified technician, if the external circuit or main line of this product is damaged. The parameters given in this manual are typical values and for reference only.
All illustrations and drawings in this manual are for reference.
This product is subject to change without notice.
Recycling:
LED
lighting products belongs to electronic products, please do recycling treatment according to the relevant WEEE directives.